- Diagnostic
- Clinical Review
- Digital Mammography
- Surgical
- Quality Control
- Features
- Specifications
- Documents
- Graphics Boards
- QC Software & Tools Accessories
Quick Brightness Stabilization for Instant Viewing
EIZO’s fully automated stability function makes use of an internal backlight sensor to quickly stabilize the brightness level at startup and to compensate for fluctuations caused by variations in ambient temperature and the passage of time.
Diagnostic Precision with Factory Adjustment
To ensure the most accurate and consistent shadings possible, EIZO carefully measures and sets every grayscale tone on the production line to offer monitors fully compliant with DICOM Part 14.
Brightness Uniformity for a Steadier Image Across the Screen
The Digital Uniformity Equalizer (DUE) function provides optimum backlight luminance uniformity which is considered difficult to attain due to the characteristics of LCD monitors, especially with larger screen sizes.
Controlled Cooling
The monitor features intelligent cooling concept by measuring and controlling the inside temperature. A mode without fan cooling is selectable so the controlled laminar airflow will be undisturbed within the room as far as possible.
Arm Mountable VESA Compliance
VESA compliance to be attached to existing mounting accessories.
Customer Assurance with Medical Standards
EIZO monitors meet the strictest medical, safety, and EMC emission standards.
Wide Viewing Angles for Multiple People Use
Thanks to the wide viewing angles, images can be viewed simultaneously by several people with the highest quality reproduction and minimal color shift.
Consistency with DICOM Part 14 Calibration
RadiForce monitors are calibrated to comply with DICOM Part 14 to offer rendering consistency over time.
Everything in a Single Glance
Large widescreen monitors with high resolution can be used instead of single 1 Megapixel monitors in ceiling suspensions. Compared with multi-monitor scenarios, these large screen monitors have no regional color differences or obtrusive bezels, thus reducing eye fatigue and the potential for distraction.
Fail-Safe Function
Special fail-safe mode through DVI input for emergency information from the system for a certain timing. As soon as the timing is active, the information will be shown immediately on the upper left screen side.
Environmentally-Friendly LED Backlight
By utilizing an energy-efficient LED as a backlight, the monitor achieves a high-brightness and low power consumption at the same time. Unlike conventional CCFL backlights, LED backlights deteriorate more slowly and thus the monitor offers a longer service life. Since the LED backlight is mercury free, it will reduce any potential impact on the environment when it is disposed of.
LCD Panel Protector for Easy Cleaning
Panel protector is pre-attached to the monitor during production or offered as an option to protect against dust and scratches. Clean lines and smooth surfaces also allow easy cleaning and disinfecting.
Model Variations |
LX300W: Without Stand, without Panel Protector
LX300W-S: With Stand, without Panel Protector LX300W-P: Without Stand, with Panel Protector |
---|---|
Cabinet Color | Black |
Panel | |
Type | TFT Color LCD Panel (IPS) |
Backlight | LED |
Size | 76 cm / 29.8" (756 mm diagonal) |
Native Resolution | 2560 x 1600 (16:10 aspect ratio) |
Display Size (H x V) | 641 x 401 mm |
Pixel Pitch | 0.2505 x 0.2505 mm |
Display Colors |
10-bit colors (DisplayPort): 1.07 billion (maximum) colors
8-bit colors: 16.77 million colors |
Viewing Angles (H / V, typical) | 170°, 170° |
Brightness (typical) | 750 cd/m² |
Recommended Brightness for Calibration | 400 cd/m² |
Contrast Ratio (typical) | 1100:1 |
Response Time (typical) | 20 ms (On/Off) |
Video Signals | |
Input Terminals | DVI Dual Link x 1, DVI Single Link x 1, HDMI (DVI-Signal) x 1, DisplayPort x 1 |
Digital Scanning Frequency (H / V) |
31 - 100 kHz / 29.5 - 61 Hz (VGA Text: 69 - 71 Hz)
Frame synchronous mode: 59.5 - 60.5 Hz |
USB | |
Function | 1 upstream, 2 downstream |
Standard | Rev. 2.0 |
Power | |
Power Requirements | AC 100 - 120 V, 200 - 240 V: 50 / 60 Hz |
Maximum Power Consumption | 200 W |
Power Save Mode | Less than 10 W |
Power Management | DVI DMPM, DisplayPort 1.1a |
Sensor | Backlight Sensor |
Features & Functions | |
Digital Uniformity Equalizer | Yes |
OSD Languages | English, German |
Physical Specifications | |
Net Weight |
LX300W: 15.5 kg +/- 1 kg
LX300W-S: 19.5 kg +/- 1 kg LX300W-P: 18.5 kg +/- 1 kg |
Hole Spacing (VESA Standard) | 200 x 100 mm and 100 x 100 mm |
Environmental Requirements | |
Degree of Protection | IP20 |
Certifications & Standards (Please contact the EIZO group company or distributor in your country for the latest information.) | CE (Medical Device Directive), EN60601-1, UL60601-1, CSA C22.2 No. 601-1, IEC60601-1, FCC-B, C-tick, RoHS, China RoHS, WEEE, CCC, GOST-R |
Supplied Accessories | AC power cord (LX300W-S only), dual link signal cable (DVI-D - DVI-D, LX300W-S only), Utility Disk (RadiCS LE, user's manual) |
Warranty | Five Years |
Dimension Drawing | JPG |
- Keep your screen free from dust and fingerprints
- Includes pump spray and cloth